FEATURES:
- Every gauge carries a calibration certificate giving actual values
- Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor
- High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
- Non-contact gauging: long life due to minimal frictional wear
- Two setting Masters: ensures correct magnification of reading at all times
- System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
- Minimum line pressure required 4.5 bars (67 psi)
- Air consumption 46 LPM
- For diameter 6 mm and above Module-1A air gauge unit is to be used
- For diameter below 6 mm Module-2A air gauge unit is to be used
| Reading | Range | Graduation | Modul |
|---|---|---|---|
| 0.0005 mm | ±0.020 mm | 20-0-20 | Mod 1 A |
| 0.001 mm | ±0.040 mm | 40-0-40 | Mod 1 A |
| 0.002 mm | ±0.080 mm | 80-0-80 | Mod 1 A |
| 0.001 mm | ±0.020 mm | 20-0-20 | Mod 2 A |
| 0.00005" | ±0.002" | 2-0-2 | Mod 1 A |
| 0.0001" | ±0.004" | 4-0-4 | Mod 1 A |
| 0.000025" | ±0.001" | 1-0-1 | Mod 1 A |
