FEATURES:
- Hardened, ground & lapped measuring faces
- Flat type measuring faces
- Measuring faces flatness 0.3 µm
Metric
| Length (L) mm | Tolerence µm | I mm | Diameter ( Ød) mm | Diameter ( ØD) mm |
|---|---|---|---|---|
| 25 | ± 1.5 | 20 | 7 | 11 |
| 50 | ± 2.0 | 40 | 7 | 11 |
| 75 | ± 2.5 | 40 | 7 | 11 |
| 100 | ± 3.0 | 60 | 8 | 12 |
| 125 | ± 3.5 | 60 | 8 | 12 |
| 150 | ± 4.0 | 60 | 8 | 12 |
| 175 | ± 4.5 | 135 | 8 | 12 |
| 200 | ± 5.0 | 160 | 8 | 12 |
| 225 | ± 5.5 | 160 | 8 | 12 |
| 250 | ± 6.0 | 180 | 8 | 12 |
| 275 | ± 6.5 | 195 | 8 | 12 |
Inch
| Length (L) inch | Tolerence inch | I inch | Diameter ( Ød) inch | Diameter ( ØD) inch |
|---|---|---|---|---|
| 1" | ± 0.00005" | 0.79" | 0.27" | 0.43" |
| 2" | ± 0.0001" | 1.65" | 0.27" | 0.43" |
| 3" | ± 0.0001" | 1.65" | 0.27" | 0.43" |
| 4" | ± 0.0001" | 2.45" | 0.31" | 0.47" |
| 5" | ± 0.00015" | 2.45" | 0.31" | 0.47" |
| 6" | ± 0.00015" | 2.45" | 0.31" | 0.47" |
| 7" | ± 0.00015" | 5.31" | 0.31" | 0.47" |
| 8" | ± 0.00015" | 6.31" | 0.31" | 0.47" |
| 9" | ± 0.0002" | 6.31" | 0.31" | 0.47" |
| 10" | ± 0.0002" | 7.15" | 0.31" | 0.47" |
| 11" | ± 0.0002" | 7.67" | 0.31" | 0.47" |
