Electronic Gauge Interface – Standard Probe Module

prod_electgag_stand_1

 

prod_electgag_stand_2

FEATURES:

  • Eight measuring channels having pre-determined full-scale DC output voltage, based on a pre-determined measuring range
  • Interfaced to eight Baker Inductive probes
  • Recessed ‘Zero’ control per channel: Travel 50 to 60 µm
  • Recessed calibration control per channel
  • Max. permissible error (MPE) per channel is less than or equal to ±1 % of the full scale measuring range
  • Reference temperature of calibration is 20 ºC
  • Output drift over operating temperature range : < 0.5 % / ºC
  • Drift of sensitivity over operating temperature range : < 0.5 % / ºC
  • Output instability: < 200 mv
  • Display stability time: < 500 ms
  • Power consumed by module 20 VA (max)
  • Voltage supply to the read-out module: 230 V AC ±10 %, 50 Hz
  • Operating temperature range 0 ºC to 45 ºC. Humidity should not exceed 60 % Rh (non-condensing)
  • All measuring channels are compatible only to the Baker Axial probes
  • Also available in 4 & 2 Channel (Probe inputs)

    ENQUIRE NOW

      Powered by

        Powered by