Air Gauge Unit – PFL


  • Every gauge carries a calibration certificate giving actual values
  • Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor
  • High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
  • Non-contact gauging: long life due to minimal frictional wear
  • Two setting Masters: ensures correct magnification of reading at all times
  • System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
  • Minimum line pressure required 4.5 bars (67 psi)
  • Air consumption 46 LPM
  • For diameter 6 mm and above Module-1A air gauge unit is to be used
  • For diameter below 6 mm Module-2A air gauge unit is to be used

0.0005 mm±0.020 mm20-0-20Mod 1 A
0.001 mm±0.040 mm40-0-40Mod 1 A
0.002 mm±0.080 mm80-0-80Mod 1 A
0.001 mm±0.020 mm20-0-20Mod 2 A
0.00005" ±0.002"2-0-2Mod 1 A
0.0001"±0.004"4-0-4Mod 1 A
0.000025"±0.001"1-0-1Mod 1 A